CONTACTORS

Contactor CTX3 3P 32A 2NO2NC 230V AC

 

• P/N: 416126
• EAN: 34194970400369
• Rating: 32A (AC – 3) switching of 3 – phs motors up to 15kW (415V).
• Resistance Loads: Up to 50A (AC – 1).
• Screw terminal capacity: Power 2 x 1.5mm² to 10mm² / Coil – 0.75mm² to 2.5mm² / Aux.circuit 0.75mm²  to 2.5mm².
• 2NO + 2NC auxiliary contacts.
• According to IEC 60947 – 4 – 1 standards and can be equipped with all Legrand CTX3 auxiliaries and accessories.
• Endurance: Up to 12million mechanical operations and 2million electrical operations.
• of operation cycle: (AC – 3)/ Hr: 1800

 

Reccomendation/Restriction

 

• This product is specifically designed for tertiary & Industrial installation.
• To use for the switching of inductive and non inductive loads.

 

TECHNICAL CHARACTERISTICS

 

Rated control supply voltage AC 50 HZ	195.5-253 V
Rated control supply voltage AC 60 HZ	195.5-253 V
Voltage type for actuating	AC
No.of normally closed contact as main contact	0
No.of normally opened contact as main contact	3
Type of electrical connection of main circuit	Cable clamp
Rated operation current le at AC-1, 400V	50A
Rated operation current le at AC-3, 400V	32A
Rated operation power at AC-3, 400V	15kW
Rated operation current le at AC-4, 400V	17A
Rated operation power at AC-4, 400V	7.5kW
No.of auxiliary contact as normally opened contact	2
No.of auxiliary contact as normally closed contact	2
Suitable for distribution board	Yes

 

 

 

Product’s Benefits

 

Installation

It can be fixing on 35mm ‘top hat” mounting rail (IEC 60715) and mounting plate.Reduced size to optimize the space available in the cabinet.

 

Usage  

It can be fitted with 2NO+2NC auxiliary contact, factory assembled. Designed to allow an easy replacement of the coil.

 

Advantage

Coil supply possible either on the top or the bottom side.