Contactor CTX3 3P 40A 2NO2NC 230V AC
- Part Number: 416136
- EAN: 3414970400567
- Rating: 40A (AC-3) Switching of 3-Phs motors up to 18.5kW(415V).
- Resistive Loads: Up to 60A (AC-1).
- Screw terminal capacity: Power – 2 x 10mm2 to 16mm2 / Coil – 0.75mm2 to 2.5mm2 / Aux.circuit – 0.75mm2 to 2.5mm2.
- 2NO + 2NC auxiliary contacts.
- According to IEC 60947 – 4 – 1 Standards & can be equipped with all Legrand CTX3 auxiliaries and accessories.
- Endurance: Up to 12million mechanical operations & 2million electrical operations.
- of operation cycles: (AC-3) / Hr:1800
Reccomendation/Restriction
- This product is specifically designed for tertiary & Industrial installation.
- To use for the switching of inductive and non inductive loads.
TECHNICAL CHARACTERISTICS
| Rated control supply voltage AC 50 HZ | 195.5-253 V |
| Rated control supply voltage AC 60 HZ | 195.5-253 V |
| Voltage type for actuating | AC |
| No.of normally closed contact as main contact | 0 |
| No.of normally opened contact as main contact | 3 |
| Type of electrical connection of main circuit | Cable clamp |
| Rated operation current le at AC-1, 400V | 60A |
| Rated operation current le at AC-3, 400V | 40A |
| Rated operation power at AC-3, 400V | 18.5kW |
| Rated operation current le at AC-4, 400V | 17A |
| Rated operation power at AC-4, 400V | 7.5kW |
| No.of auxiliary contact as normally opened contact | 2 |
| No.of auxiliary contact as normally closed contact | 2 |
| Suitable for Distribution board | Yes |
Product’s Benefits
Installation
It can be fixing on 35mm ‘top hat” mounting rail (IEC 60715) and mounting plate.Reduced size to optimize the space available in the cabinet.
Usage
It can be fitted with 2NO+2NC auxiliary contact, factory assembled. Designed to allow an easy replacement of the coil.
Advantage
- Coil supply possible either on the top or the bottom side.
- Front cover can be removed for the visual inspection of arc chambers and contacts.
